Sunny Studio Stamps Fall Release (Video)



Hello friends, today is the release day for the brand new Sunny Studio Stamps Fall Release. 

Head over to the Sunny Studio Stamps Blog for more information and a ton of inspiration from Mendi using her release. 

The release video is linked down below as well as all the brand new products. Let me know your favourite! 


Thanks for stopping by today and I'll see you next time. 
- Eloise

Hello Bluebird - Field Mice (Video)

Hello friends, today I have a card for Hello Bluebird Stamps using the new Field Mice Stamp Set.  


I started off with stamping and colouring my images out using Copic Markers. I then cut them out and started work on my background.

(Copic Markers Used: E30, E31, E33, E34 / W00, W0, W1, W2 / BG10, BG11, BG23, BG13 / R12, R14, R24, R27 / YR30, Y23, YR21, YR23 / N2 / R00, R30 / B000 / YG00, YG01, YG23, YG17)


For my background I used a stencil from MFT to create the green hills using Twisted Citron Distress Oxide Ink. I then flipped the stencil and used Tumbled Glass Distress Ink to ink blend a little blue on there too. I cut down the panel to around 3 1/4" wide and added foam tape on the back. I then cut down a piece of blue striped patterned paper and adhered my ink blended background on top. 


I then added adhesive to all my mice and accents and adhered them down into place. For my sentiment I white heat embossed the 'Well, Hello There' onto a black strip of cardstock and adhered it into place. 


Thanks so much for stopping by today and I'll be back tomorrow wiht another card and video. 
- Eloise

Craft Online - Merry Christmas (Video)

Hello friends, today I'm here for Craft Online and I'm making my first Christmas Card of the season. I'll be using the Avery Elle Polar Peek-A-Boo Pals Set along with the Winter Trails Star Dies from Studio Lights.


To start off I stamped out my images using Tuxedo Black Memento Ink onto white cardstock and then coloured them in with Copic Markers. Once they were coloured I cut them out and adhered the accessories onto each of the critters. 

(Copic Markers Used: R000, R30 / C00, C0, C1, C3, C5, C7, C9 / E50, E51, E53, E55, E57, E59 / E40, E41, E42, E43, E44, E47, E49 / W00, W0, W1, W2, W3, W5, W7 / E97, E07, E08, E09 / B93, B95, B97, B99 / R32, R35, R37, R39 / RV91, RV93, RV95, RV99 / BG90, BG93, BG96, BG99 / YR00, YR20, YR21, YR24 / 0)


I then die cut out the Winter Trails Die from white cardstock and adhered my critters inside the stars. I cut off the excess from the critters that overlapped the other stars, as well. 


Lastly, I took a piece of dark blue/grey striped patterned paper and adhered my scene together using foam tape. I then white heat embossed the 'Merry Christmas' sentiment onto a strip of green cardstock and adhered it into place. 


That finished up my card for today, I hope you enjoyed and I'll see you next time! 
- Eloise

Pretty Pink Posh June Product Release Blog Hop (Video)


Hi friends, today I'm participating in the Pretty Pink Posh June Product Release Blog Hop along with so many other designers and I'm so super duper excited to be here! This new release is filled with so many fun tropical themed stamps along with more stencils and jewels. 


There will be an opportunity to win four $25 gift certificates to the store (two for each day). That's a few opportunities, so don't forget to comment on each persons blog each day! Comments must be left by 11:59 PST on the 17th of June and then winners will be announced on the Pretty Pink Posh Blog.

Here are a list of all the participants for the second day of the blog hop, here is a link to the first day if you haven't already checked it out!

------------------------------------------------

Pretty Pink Posh Blog
------------------------------------------------

For today's card I used the Tropical Toucans Stamp Set and paired it with a few dies; Storybook 1, Tropical Frame and Stitched Notes Die Sets. 


I started off with stamping out all the images from the Tropical Toucan Stamp Set and coloured them in with Copic Markers. I then cut them all out. 

(Copic Markers Used: YR00, YR02, YR12, YR18 / Y11, Y13, Y15, YR15 / R14, R24, R27, R89 / YG01, YG23, YG17, YG67 / BG11, BG13, BG45, BG49 / RV21, RV23, RV25, RV29 / BV01, BV02, BV04, BV08 / W00, W0, W1, W3, W5, W7, W9 / 0 / E51, E53, E55, E57)


Next I took a piece of green cardstock and cut it out with the frame from Stitched Notes. I then used some Mowed Lawn Distress Ink and ink blended at the top and bottom of the green panel just a little. I then used the Storybook 1 Dies and cut it from the centre. I then die cut the Tropical Frame from some vellum and adhered it behind the green frame for a little added interest. I then took some pink cardstock, cut out the centre and adhered it to a white card base. Lastly, I added foam tape onto the back of the frame and adhered it down on the card base as well. 


I then took all my images and adhered them down into place over the frame. I used a little foam tape and liquid adhesive to get some dimension. 


To finish up, I stamped the 'You Can Do It' sentiment on the bottom section of my card and scattered some Luau Jewels around as well. 

Thanks so much for stopping by today, make sure you head over to Yoonsun Hur's blog to continue on. Leave a comment to be entered into the gift card giveaway and I'll see you all next time. 

- Eloise

Craft Online - Happy Birthday (Video)


Hello friends, today I'm back for Craft Online to create a Birthday Card. I'll be using some dies from Poppy Crafts along with glitter paper to create a fun sparkly card. 


I started off with pulling all of the dies I was using out (they're all linked down below) and die cut them from the colours of glitter cardstock I wanted to use. I cut the butterfly from pink, leaves from two shades of green and the background from copper. I also die cut a circle from vellum and the banner from black. Once everything was die cut out I added foam tape to the backs of the leaves and background and adhesive to the back of the butterfly. 


I adhered my background down to a card base and then adhered the leaves and butterfly to my vellum circle. For my sentiment I white heat embossed the 'Birthday' from Happy Happy Happy by Lawn Fawn onto the right hand side. I then stamped the 'Happy', die cut it out and adhered it to the left hand side of my banner. I added foam tape onto the back and adhered it into place. 


Lastly I took my vellum circle, added more adhesive onto the back and adhered it into place. I then decided my images needed more dimension so I took some Copic Markers and coloured in the centres a little to make them have more depth to them. 

(Copic Markers Used: R81, R83, R85 / G24, G28, G29 / YG61, YG63, YG67)

Thanks so much for stopping by today, the video is linked down below if you would like to watch. 


See you next time! 
- Eloise

Hello Bluebird - For A Fairy Good Friend


Hello friends, today I have a card for Hello Bluebird using the Fairy Garden Stamp Set. I paired this set with the Gallery Frame 3 Dies and an alcohol inked background. 


I started off with stamping my images on white cardstock and colouring them in with Copic Markers. I stuck with a pink, purple and aqua colour scheme. Once they were coloured, I cut them out. 

(Copic Markers Used: RV21, RV23, RV25, RV29 / B63, BV02, BV04, BV08 / RV91, RV93, RV95, RV99 / E41, E42, E43, E44 / W00, W0, W1, W3, W5 / Y13 / R30 / B0000, B000, B01, 0 / YG01, YG23, YG07, YG17 / YG61, YG63, YG67, G28 / Y21, YR21, YR23, YR24 / BG10, BG11, BG13, BG49, E000, E00, E21, E02)


I also cut the Gallery Frame 3 Dies from silver glitter cardstock and cut a couple of the strips out to change the design. I added foam tape onto the back of the frame and all of my images and set them off to the side. 

For my alcohol ink background, I used four colours along with alcohol solution on some yupo paper. I first added on alcohol solution and then dripped on the four colours, used my Distress Sprayer Tool to help move the colours around and then dried it off with a heat tool. 

(Alcohol Ink Colours Used: Tim Holtz - Limeade, Pool, Amethyst, Turquoise)


Lastly I adhered my frame at an angle and adhered my images inside. For the sentiment I white heat embossed the 'For A Fairy Good Friend' onto a black strip of cardstock. I then adhered that onto my card and tied a hemp cord bow onto the side. 

That finished up my card for today, thanks so much for stopping by. I hope you got inspired and I'll see you next time. 

- Eloise

Pretty Pink Posh April Product Release Blog Hop


Hi friends, today I'm participating in the Pretty Pink Posh April Product Release Blog Hop along with so many other designers and I'm so super duper excited to be here! This new release is filled with so many fun stamps and also a brand new product; Stencils, which I'm sure you're all loving!


There will be an opportunity to win four $25 gift certificates to the store (two for each day). That's a few opportunities, so don't forget to comment on each persons blog each day! Comments must be left by 11:59 PST on the 8th of May and then winners will be announced on the Pretty Pink Posh Blog.

Here are a list of all the participants for the second day of the blog hop, here is a link to the first day if you haven't already checked it out!

------------------------------------------------

------------------------------------------------

Now that all the details are out of the way, let's move onto the card I made.

I used the new Mother's Day Stamp Set along with the Lattice Background Die



I started off with stamping out my images from the Mother's Day Stamp Set using a stamping tool, I coloured them in with Copic Markers and cut them out. I also cut the Lattice Background Die from white cardstock and a stitched circle from light grey cardstock. 

(Copic Markers Used: RV10, RV13, RV25, RV19 / YR00, YR02, YR12, YR18 / BG10, BG11, BG13, BG49 / Y00, Y11, Y13, Y18 / YG01, YG23, YG07, YG68 / B0000, B000, B01, 0)


I next cut down a yellow card base and adhered my lattice background over the top. I stamped the 'Happy Mother's Day' sentiment with black ink onto the grey circle and also added that to my background on the right hand side. 


Lastly I added adhesive to the backs of my flower images and adhered them into place next to the sentiment. 

Video is linked down below. 


Thanks so much for stopping by today, be sure to check out the next person on the hop which is Jacquie Dean. See you next time! 

- Eloise





The Letter Lingo Grand Opening - Set of Coffee/Tea Cards


Hello friends, today it is the grand opening day for The Letter Lingo! The team has been sharing sneaks for a while and the day has finally come. The Letter Lingo has started off with releasing three stamp sets and I've shared cards previously over on my Instagram and Blog. 


For today's project I'm using the Tea-rrific Stamp Set to create a coordinating set of cards. I used a colour combo off of Pinterest (like always) to create my colour scheme.

I started off with stamping out my images and colouring them in with Copic Markers. I then cut them out. 

(Copic Markers Used: Y23, Y32, YR24, YR27 / B61, BV02, BV04, BV08 / R20, R21, R22, R24 / YG61, YG63, YG67, G28 / E000, E00, E21, E02 / R30 / E41, E42, E43, E44, E47 / W00, W0, W1, W3, W5, W7)

I also stamped my sentiments, I used 'You're Tea-rriffic' and 'Brew Can Do It' and cut around them as well. 


For my colour combo, I used one I found on Pinterest. It's a purple, green, navy blue, salmon pink and a golden yellow. I cut strips of coordinating colours into random width strips and added adhesive onto the backs of them. I also cut down two top folding card bases. 


I then adhered my stripes along my card bases. One diagonally and one horizontally. I then propped up my images and sentiments on foam tape and adhered them over each of the stripes. 

That finished up my cards for today, I hope you enjoyed. Make sure you head over to The Letter Lingo and give them some support. 

See you next time! 
- Eloise

Craft Online - Hope Your Birthday Is Swell (Video)


Hello friends, today I'm here for Craft Online and I have a birthday card to share with you all. I'm using the Sea-Prise! Stamp Set from Avery Elle along with the Stripe Panel Die from Poppy Crafts. I also created an Alcohol Ink background to go along with the ocean theme. 


I started off with a piece of Yupo paper and added some alcohol solution onto it and spread it around with the Distress Marker Spritzer Tool. I then dotted on some of the Alcohol Inks and used the same technique to spread it around. I dried it off a little with a heat tool and added a second layer. Once my background was complete I stamped out my images and coloured them in. 

(Copic Markers: W00, W1, W3, W5 / Y11, Y13, Y17, YR23 /  W4, W5, W7, W9 / W00, W0, W1, W2 / YG01, YG23, YG07, YG67 / B21, B34, B24, B26 / YR00, YR02, YR12, YR18)

I cut out my images and also cut the Stripe Panel Die from silver glitter cardstock. I then added foam tape to the backs of my images and frame and then adhered the frame at an angle on the bottom of my alcohol inked piece. I also adhered my images over the top. 


For my sentiment I white heat embossed the 'Hope Your Birthday Is Swell' from the same set onto a strip of black cardstock. I then cut it down and added a twine bow to the left hand side. I added more foam tape on the back and adhered it onto the right hand side of my card. 

To finish up I used some clear droplets and adhered them around my card to look like bubbles. 

Thanks so much for stopping by today, my video is linked down below and I'll see you next time.


- Eloise

Sunny Studio Stamps + Therm-O-Web - I Love You Rain Or Shine (Video)


Hello friends, today I'm here for Sunny Studio Stamps + Therm-O-Web to bring you this rainbow themed card. I'm using the Rain Or Shine Stamp Set along with a few products from Thermoweb to create this card. 


I started off with adding the Deco Foil Adhesive to some white cardstock and set it to the side to dry. I then stamped and coloured my images using Copic Markers. I then cut them out. 

(Copic Markers Used: Y11, Y13, Y18, Y19 / E41, E41, E42, E43, E44, E47 / W1, W3, W5, W7 / B0000, B000, 0 / R14, R27, R29, R89 / YR00, YR02, YR12, YR18 / YG01, YG23, YG07, YG17 / BG10, BG11, BG13, BG49 / B63, BV02, BV04, BV08 / B41, B12, B16, B18)

Once my adhesive for the foil was dry I added the Rainbow foil over the top and pressed it down with my fingers. I then kept adding layers over the top to create a more full background. I then die cut the Frilly Frames Stripes Dies from the rainbow foil piece and added foam tape onto the backs of the diagonal stripes. I then took off the backs and adhered a white card base onto it. I removed the die and then ran it back through my die cutting machine and adhered the white frame over the top. 


I then added foam tape onto the backs of my images and also used the Tape Runner XL adhesive to adhere the clouds and puddle too. 

I white heat embossed the 'I Love You Rain Or Shine' sentiment onto a square piece of black cardstock and adhered it with foam tape as well. 

Thanks for stopping by today, check out the video below and I'll see you next time. 


- Eloise

The Letter Lingo - You're My Main Squeeze

Hello friends, today I'm here for The Letter Lingo sharing my first project as apart of their design team. The Letter Lingo is a brand new company and I'm so excited to be apart of it. They're offical launch date is April 29th but the team is sharing projects of the three stamp sets being released to get you all excited. Today I'm using the new Citrus Crush Stamp Set. 


I started off with stamping and colouring my images with Copics. I then cut them out and added foam tape to the backs of all them all. 

(Copic Markers Used: YG01, YG23, YG07, YG17 / Y11, Y13, Y15, Y19 / YR00, YR02, YR12, YR18 / E41, E42, E43, E44 / BG10, BG11, 0 / C0, C1, C3, C5 / W00, W0, W1, 0)

I then die cut a square scallop frame from white cardstock, and added foam tape to that, too.


For my background, I used a mix of Distress Oxide Ink colours and ink blended those onto a piece of watercolour cardstock. I splattered on some water and dried it off with a heat tool. 

(Distress Oxide Inks Used: Squeezed Lemonade, Fossilised Amber, Spiced Marmalade, Carved Pumpkin)

I then adhered my frame to the ink blended piece and then adhered down all my images plus sentiment. 

That finished up my card for today, make sure you head over to The Letter Lingo and sign up to the newsletter to make sure you don't miss out on anything. Remember the first release is coming on the 29th of April, which isn't far away. Also, follow The Letter Lingo on socials as well!

I hope you enjoyed my project and I'll see you next time. 
- Eloise