The Letter Lingo Grand Opening - Set of Coffee/Tea Cards


Hello friends, today it is the grand opening day for The Letter Lingo! The team has been sharing sneaks for a while and the day has finally come. The Letter Lingo has started off with releasing three stamp sets and I've shared cards previously over on my Instagram and Blog. 


For today's project I'm using the Tea-rrific Stamp Set to create a coordinating set of cards. I used a colour combo off of Pinterest (like always) to create my colour scheme.

I started off with stamping out my images and colouring them in with Copic Markers. I then cut them out. 

(Copic Markers Used: Y23, Y32, YR24, YR27 / B61, BV02, BV04, BV08 / R20, R21, R22, R24 / YG61, YG63, YG67, G28 / E000, E00, E21, E02 / R30 / E41, E42, E43, E44, E47 / W00, W0, W1, W3, W5, W7)

I also stamped my sentiments, I used 'You're Tea-rriffic' and 'Brew Can Do It' and cut around them as well. 


For my colour combo, I used one I found on Pinterest. It's a purple, green, navy blue, salmon pink and a golden yellow. I cut strips of coordinating colours into random width strips and added adhesive onto the backs of them. I also cut down two top folding card bases. 


I then adhered my stripes along my card bases. One diagonally and one horizontally. I then propped up my images and sentiments on foam tape and adhered them over each of the stripes. 

That finished up my cards for today, I hope you enjoyed. Make sure you head over to The Letter Lingo and give them some support. 

See you next time! 
- Eloise

Craft Online - Hope Your Birthday Is Swell (Video)


Hello friends, today I'm here for Craft Online and I have a birthday card to share with you all. I'm using the Sea-Prise! Stamp Set from Avery Elle along with the Stripe Panel Die from Poppy Crafts. I also created an Alcohol Ink background to go along with the ocean theme. 


I started off with a piece of Yupo paper and added some alcohol solution onto it and spread it around with the Distress Marker Spritzer Tool. I then dotted on some of the Alcohol Inks and used the same technique to spread it around. I dried it off a little with a heat tool and added a second layer. Once my background was complete I stamped out my images and coloured them in. 

(Copic Markers: W00, W1, W3, W5 / Y11, Y13, Y17, YR23 /  W4, W5, W7, W9 / W00, W0, W1, W2 / YG01, YG23, YG07, YG67 / B21, B34, B24, B26 / YR00, YR02, YR12, YR18)

I cut out my images and also cut the Stripe Panel Die from silver glitter cardstock. I then added foam tape to the backs of my images and frame and then adhered the frame at an angle on the bottom of my alcohol inked piece. I also adhered my images over the top. 


For my sentiment I white heat embossed the 'Hope Your Birthday Is Swell' from the same set onto a strip of black cardstock. I then cut it down and added a twine bow to the left hand side. I added more foam tape on the back and adhered it onto the right hand side of my card. 

To finish up I used some clear droplets and adhered them around my card to look like bubbles. 

Thanks so much for stopping by today, my video is linked down below and I'll see you next time.


- Eloise

Sunny Studio Stamps + Therm-O-Web - I Love You Rain Or Shine (Video)


Hello friends, today I'm here for Sunny Studio Stamps + Therm-O-Web to bring you this rainbow themed card. I'm using the Rain Or Shine Stamp Set along with a few products from Thermoweb to create this card. 


I started off with adding the Deco Foil Adhesive to some white cardstock and set it to the side to dry. I then stamped and coloured my images using Copic Markers. I then cut them out. 

(Copic Markers Used: Y11, Y13, Y18, Y19 / E41, E41, E42, E43, E44, E47 / W1, W3, W5, W7 / B0000, B000, 0 / R14, R27, R29, R89 / YR00, YR02, YR12, YR18 / YG01, YG23, YG07, YG17 / BG10, BG11, BG13, BG49 / B63, BV02, BV04, BV08 / B41, B12, B16, B18)

Once my adhesive for the foil was dry I added the Rainbow foil over the top and pressed it down with my fingers. I then kept adding layers over the top to create a more full background. I then die cut the Frilly Frames Stripes Dies from the rainbow foil piece and added foam tape onto the backs of the diagonal stripes. I then took off the backs and adhered a white card base onto it. I removed the die and then ran it back through my die cutting machine and adhered the white frame over the top. 


I then added foam tape onto the backs of my images and also used the Tape Runner XL adhesive to adhere the clouds and puddle too. 

I white heat embossed the 'I Love You Rain Or Shine' sentiment onto a square piece of black cardstock and adhered it with foam tape as well. 

Thanks for stopping by today, check out the video below and I'll see you next time. 


- Eloise

The Letter Lingo - You're My Main Squeeze

Hello friends, today I'm here for The Letter Lingo sharing my first project as apart of their design team. The Letter Lingo is a brand new company and I'm so excited to be apart of it. They're offical launch date is April 29th but the team is sharing projects of the three stamp sets being released to get you all excited. Today I'm using the new Citrus Crush Stamp Set. 


I started off with stamping and colouring my images with Copics. I then cut them out and added foam tape to the backs of all them all. 

(Copic Markers Used: YG01, YG23, YG07, YG17 / Y11, Y13, Y15, Y19 / YR00, YR02, YR12, YR18 / E41, E42, E43, E44 / BG10, BG11, 0 / C0, C1, C3, C5 / W00, W0, W1, 0)

I then die cut a square scallop frame from white cardstock, and added foam tape to that, too.


For my background, I used a mix of Distress Oxide Ink colours and ink blended those onto a piece of watercolour cardstock. I splattered on some water and dried it off with a heat tool. 

(Distress Oxide Inks Used: Squeezed Lemonade, Fossilised Amber, Spiced Marmalade, Carved Pumpkin)

I then adhered my frame to the ink blended piece and then adhered down all my images plus sentiment. 

That finished up my card for today, make sure you head over to The Letter Lingo and sign up to the newsletter to make sure you don't miss out on anything. Remember the first release is coming on the 29th of April, which isn't far away. Also, follow The Letter Lingo on socials as well!

I hope you enjoyed my project and I'll see you next time. 
- Eloise


Hello Bluebird - Preview Day Four


Hello friends, today is Preview Day Four for Hello Bluebird Stamps newest release and the last day before the release at 7PM MST. There are a total of 6 stamps and 4 die sets this release and they're all incredible. 

Today we are showcasing the Fly A Kite Stamp Set which features all these cute critters with their kites. 


I started off with stamping and colouring my images in with Copic Markers. I then cut them out and adhered them together with each of their kites. 

(Copic Markers Used: E41, E42, E43, E44 / W00, W0, W2, W4 / R000, R00, R30, R21 / RV10, RV13, RV25, RV19 / YR00, YR02, YR12, YR18 / YG01, YG23, YG07, YG68 / BG10, BG11, BG13, BG49 / Y11, Y13, Y15, Y19 / B000 / 0)


Next I used a background that I had created and didn't use the other day. I made it by using a cloud stencil and a bunch of Distress Oxides Inks to create the dreamy background, splattered it with water and dried it off with a heat tool. 

(Distress Oxide Inks Used: Squeezed Lemonade, Carved Pumpkin, Tattered Rose, Abandoned Coral, Picked Raspberry, Shaded Lilac, Wilted Violet, Broken China)


Lastly, I added foam tape onto the backs of my images and adhered them into place and then stamped the 'You Lift Me Up' sentiment on the bottom right hand corner. 

Thanks so much for stopping by today, and make sure you check out the full release over at the shop at 7PM MST time. 

See you next time! 
- Eloise

Hello Bluebird - Preview Day Three

Hello friends, Eloise here for Preview Day Three at Hello Bluebird Stamps. Today we are showcasing the new Unicorn Tales Stamp Set. 


I started off with stamping and colouring my images in with Copic Markers. I then cut them out. I then used the Grassy Knoll Dies and cut two cloud pieces from white and vellum. I adhered them together and added foam tape on the backs and also on the backs of the unicorns. 

(Copic Markers Used: RV10, RV13, RV25, RV19 / B63, BV02, BV04, BV08 / BG10, BG11, BG13, BG49 / W00, W0, W2, W3 / 0)


I then ink blended some Distress Oxide Inks onto some watercolour cardstock. Once they were blended I flicked on some water and dried it off with a heat tool. 

(Distress Oxide Inks Used: Picked Raspberry, Tattered Rose, Broken China, Salty Ocean, Shaded Lilac, Wilted Violet)

I then stamped out the 'Hope Your Day Is Magical' sentiment with black and gold heat embossed the sparkle elements as well. I adhered my elements into place and my card was complete. 

Thanks so much for stopping by today and I'll see you again tomorrow. 
- Eloise

Hello Bluebird - Preview Day Two


Hello friends, today is Preview Day Two for Hello Bluebird Stamps and today we are showcasing the new Maverick Stamp Set. 


 I started off with stamping out my images from Maverick, colouring them in with Copic Markers and cut them out. I also used the Yeti or Not Stamp Set for some trees. 

(Copic Markers Used: C00, C1, C3, C5, C7, C9 / RV10, RV13, RV25, RV19 / YG01, YG23, YG07, YG67 / E40, E41, E42, E43, E44 / B0000, B000, 0)

Once they were coloured I used some Distress Oxide Inks to ink blend on a sunset background. I then flicked on some water and dried it off with a heat tool. 

(Distress Oxides Used: Squeezed Lemonade, Carved Pumpkin, Tattered Rose, Picked Raspberry, Shaded Lilac, Wilted Violet)


I added adhesive to the backs of my images and adhered them down. I used a scattering of trees at the bottom and the clouds/plane at the top. I also cut off the excess from the sides. For my sentiment I used the 'You're The Best' sentiment from the same Maverick Stamp Set and stamped it in black onto my background. 

Thanks for stopping by today and I'll see you tomorrow for Day Three. 
- Eloise



Hello Bluebird - Preview Day One


Hello everyone and welcome to Preview Day One for Hello Bluebird Stamps. Today we are showcasing the Fairy Garden and Garden Friends Stamp Sets. 


I started off with stamping my images and colouring them in with Copic Markers. I then cut them out and set them off to the side. 

(Copic Markers Used: BG10, BG11, BG13, BG49 / RV10, RV13, RV25, RV19 / YG01, YG23, YG07, YG67 / E41, E42, E43, E44 / E31, E34 / E000, E00, E21, E02 / Y23, Y32, YR24, YR27 / Y11, Y13, Y17, YR23 / B0000, B000 / 0 / B63, BV02, BV04, BV08 / R14, R24, R27, R29 / W00, W0, W1, W3)


For my background I took various colours of Distress Oxide Inks and ink blended them upwards, fading to white. I flicked on some water and dried it off with a heat tool. I then added foam tape to the backs of my images and adhered them down into place. 

(Distress Oxides Used: Peeled Paint, Twisted Citron, Blueprint Sketch, Broken China, Wilted Violet, Shaded Lilac)

For my sentiment, I stamped the 'Thank You Fairy Much' with black ink. 

Thanks so much for stopping by and I'll see you tomorrow. 
- Eloise

Sunny Studio Stamps Summer Release + Wrap Around Box Tutorial (Video)



Hello friends, today I'm sharing a product release video for Sunny Studio Stamps along with a tutorial on the new Wrap Around Box Dies. 


Everything is now available for purchase so the links are down below. 

See you next time. 
- Eloise